Longo was brought in by the school administration to provide laboratory planning and construction services for a chemistry lab renovation. Scope of work for this turnkey construction project:
Location: Bardonia, New York (Rockland County)
Scope of work to be performed:
Longo is to be providing complete turnkey services for a science lab renovation at Albertus Magnus. Longo has already submitted permits to the town and is beginning “disconnects” of the electrical, plumbing and mechanicals. This precedes demolition work, which will be documented in the next 2 weeks.
In the video below is a short narration by Nat Longo at Albertus Magnus.
Interested to learn more about renovating science lab rooms? Want to speak to Nat Longo directly about your science lab and the options available to you regarding lab design, purchasing new furniture, etc.?
Please direct all inquiries with regards to laboratory planning, furniture and construction projects to the marketing department at Longo (info@longoinc.com). To request a consultant & laboratory space evaluation, email Anthony Stellatos (anthonys@longoinc.com).
Longo offers laboratory planning, budget and full turnkey services to industrial/commercial clients and private schools in New Jersey (Bergen-Passaic-Essex-Hudson-Morris Counties), New York (Westchester-Rockland-Dutchess-Putnam-Orange Counties) and Connecticut (Fairfield County). Please contact us for your laboratory design and furniture requirements (info@longoinc.com).
26000 SHELDON AXIS Infinity TABLE with Motorized Height Adjustment
GENERAL:
Student laboratory table shall be multi-purpose and must accommodate computer technology, ADA accessibility and combination lab/lecture functions. In order to provide these functions, the work surface is adjustable from 30″ to 36″ quickly converting from lecture height to lab height. This must be accomplished without altering sink height or mechanical/electrical connections.
Epoxy resin work surface is curvilinear shaped and measures 96” x 50”. The unique shape of the counter top is provided to eliminate corners from projecting into the aisles. The sink section is cantilevered from main steel understructure and supported by heavy-duty steel assembly. The sink top is used for mounting the sink, water, gas, air or vacuum fixtures. Sink is permanently mounted at 34″ height to comply with ADA Guidelines for Wheelchair Accessibility. All piping is enclosed with contoured metal or wood panels. Counter top to be 1” molded epoxy resin with integral raised marine edge.
Supporting structure is constructed of heavy gauge steel and must provide support to prevent counter top from deflecting. A welded tubular steel U shaped frame attached to the top to provide uniform support of the top surface. Three mechanical lifting legs are attached to a welded steel frame leg structure to provide rigid stability for the legs lifting the top surface.
Under the top surface is mounted a convenient lockable rod storage compartment. All metal parts are finished with powder coat epoxy for maximum chemical resistance.
Incorporated into the steel supporting understructure is a 110 VAC computer controlled synchronized power assist mechanism, which lifts the student work surface quietly and quickly. The student work surface is infinitely adjustable between 30” and 36” by remote control.
The sink support and shroud are also steel construction and powder coated in one of 6 contemporary colors. The sink support provides housing for all the mechanical rough in connections and contains a removable front panel to provide access. The molded epoxy resin sink incorporates a two tiered design to allow ADA accessibility and a deep section to allow for larger lab items access and cleaning. The sink is a two tiered trapezoidal shape where the base of the trapezoid is curved to match the curve of the counter top. The width of the rear is 22.5” wide and the width of the front is 28 .375”. The ADA section of the sink is 4.75” deep and has integrated drain grooves. The rear section is 11.5” deep and the overall length front to back dimension is 22”.
Rear metal panels are included with this unit and enclose the rear leg supports. These panels can also be powder coated to coordinate with the sink and sink shroud.
Standard services and accessories to be included for each table:
(A) #80020 Unicast cold water/gas vandal resistant fixtures.
(B) #80020WBBV Unicast cold water/gas vandal resistant fixture with wrist blade handle & ball valve. (one table only)
(C) #85101 GFI duplex electrical fixtures (one mounted on each side of sink).
(D) Clamp on upright rods, (2) cross arms and (4) connectors
Please direct all inquiries with regards to laboratory planning, furniture and construction projects to the marketing department at Longo (info@longoinc.com).
Longo offers laboratory planning, budget and full turnkey services to industrial/commercial clients and private schools in New Jersey (Bergen-Passaic-Essex-Hudson-Morris Counties), New York (Westchester-Rockland-Dutchess-Putnam-Orange Counties) and Connecticut (Fairfield County). Please contact us for your laboratory design and furniture requirements (info@longoinc.com).
Location: New Rochelle, NY (Westchester County)
Scope: Full Turnkey Construction Service – Physics Room Renovation & Create New Physics Laboratory Space
Products Specified & Delivered: Sheldon Wood Laboratory Casework, Fume Hoods, Axis 3 Physics Tables, Epoxy Resin Tops
Iona Prep selected Longo because of our committment to delivering a high quality laboratory environment on-time and within budget. Longo had previously completed the biology & chemistry labs at the school in 2007.
To learn more about the programs offered at Iona Preparatory School, please visit http://www.ionaprep.org/
Please direct all inquiries with regards to the Iona Prep School construction project to the marketing department at Longo (info@longoinc.com). Longo offers full turnkey services to all private schools in the Westchester-Rockland-Dutchess-Putnam-Orange area, along with Fairfield County in Connecticut.
Project: Cavalini Middle School, Upper Saddle River, NJ (Bergen County)
Products Specified & Delivered: Sheldon Wood Laboratory Casework, Fume Hoods, Axis Infinity Laboratory Stations, TEII Lab Centers
Purchasing By General Contractor – public/competitively bid project.
School district had asked Longo to assist in the design of middle school science labs in early 2009 for that summer delivery – and WE DELIVERED!
Longo’s laboratory consulting team works with school district officials, architects and construction managers to professionally design lab space for optimum saftey and functionality. Please direct all inquiries with regards to the laboratory planning, furniture and construction projects to the marketing department at Longo (info@longoinc.com)
Projects: Louis E. Dieruff High School, William Allen High School
Architect Firm: USA Architects Planners Interior Designers (http://www.usaarchitects.com/)
Products Specified & Delivered: Sheldon Wood Laboratory Casework, Fume Hoods, Axis 3 Laboratory Stations
Purchasing By General Contractor – public/competitively bid project.
Installation photos coming soon – project is multi-phased with the last Sheldon lab furniture to be installed in April 2010. The two previous phases took place in July 2009 & December 2009.
Longo’s laboratory consulting team works with school district officials, architects and construction managers to professionally design lab space for optimum saftey and functionality. Please direct all inquiries with regards to the laboratory planning and construction projects to the marketing department at Longo (info@longoinc.com)
|
|
|
|